Inter-M HDRC-Z440 - Manual (Page 28)

•
Function Run
This Function Run menu allows you to execute the function when you use a keyboard or a DVR without the
function keys (Preset, Pattern, Tour and scan).
1. Select the desired Function by pushing
Joystick Up or Down.
2. Select the number by twist the Joystick in PRESET,PATTERN,TOUR, and SCAN.
3. Press CTRL or IRIS Open to execute.
Note: To execute the function, you should save the function (PRESET, PATTERN, TOUR, and SCAN) first.
- HOME
Select the HOME menu and press CTRL key. Then dome camera goes to the default position to which the
dome camera returns after an assigned period of inactivity passes.
The default position may be a Preset, Tour, Pattern or no action.
- AUTO PAN
You can execute the endless auto pan which is to turn one direction continuously by select the Auto Pan.
- ALARM OUT
This function can operate only when the alarm output setup has the time in the alarm menu.
Ex)
You can select OUT2 and press CTRL or IRIS Open then that relay operates during the setting time only.
FUNCTION RUN SETUP
CTRL KEY
PRESET : ---
PATTERN : ---
TOUR : ---
SCAN : ---
HOME
AUTO PAN
ALARM OUT : ---
EXIT
ALARM OUT SETUP
OUT1 : ALARM
OUT2 : 1 MIN
EXIT