Teka Hydroclean HL 870 - Manual (Page 42)

42
How to use the oven cleaning cycle
Always use the cleaning programme with a
cold oven. Running it with a hot oven may
have adverse effects.
1. First remove the trays and all accessories
from the oven interior, including the tray
suppor ts and telescopic guide rails.
Caution
Do not clean the oven and tray at the same
time using the TEKA Hydroclean
® function as
you will not obtain good results. To clean the
tray, follow the instructions provided below.
2. With the oven cold, gently pour 250 ml of
water into the bottom of the oven cavity.
3. Touch the sensor to switch the oven
on.
4. Turn the function selector anti-clockwise
until the symbol appears on the
timer display.
5. You will hear a beep indicating that the
Hydroclean ® has star ted. Symbol
will flash slowly and the time remaining to
complete the cleaning cycle will appear on
the display.
IMPORTANT
The duration of this cycle cannot be changed.
To stop before completion of the cycle, turn
the oven off by touching the sensor
.
6. When the cycle is finished, the oven will
turn itself off, an alarm will sound and
symbol
will flash quickly.
7. Touch any sensor with your finger tip to stop
the alarm and to turn off symbol .
8. Any traces of dir t and excess water can
now be removed with a damp cloth.
IMPORTANT
Do not open the oven door until the cleaning
programme has completely finished as the
cooling phase is necessar y for it to work pro-
perly.
The cleaning programme should be done at a
low temperature. When it has finished, any
residue can be safely removed with a damp
cloth. Cooling times var y depending on the
room temperature. Before touching any insi-
de sur face of the oven, check that it is cool.
3172484-002 EPIFA.QXD:- 8/9/11 15:22 Página 42