Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) - Manual (Page 18)

WaveLink Medium-Bandwidth (8-13 GHz) Differential Probe
Positioner Tip (Browser)
The Positioner Tip (Browser) Kit (Dxx30-PT-KIT) provides the ability to access the signal on the
DUT without permanently attaching a lead or other device. It combines high performance with quick
access to a variety of probe points when used as a hand-held browser (using the wand attachment)
or as a fast and convenient method to re-position a fixed test point (using a positioner tool). The
pogo pin tips are adjustable from 0 to 3.5 mm (0 to 0.14") and have 0.6 mm (0.024") of Z-Axis
compliance. Because of its thin form factor and spring-loaded tips, it is ideally suited for use with
multiple probes in tight areas such as the back side of boards with ball-grid array packaged ICs.
Care should be taken when using the positioner tip. Avoid lateral motion against the circuit trace with
the tip, and do not exceed the pogo pin Z-Axis compliance.
NOTE: Some mechanical positioners (such as the EZ probe) may exert excessive Z-Axis compliance
during setup, so be extra careful with these types of mechanical positioners.
Two replacement resistive tips are provided with the positioner tip. These tips may be replaced in the
field if the tip is damaged. See "Replacing Spring-Loaded Tips and Tip Sockets on the Positioner Tip"
on page 34 for more information.
Positioner Tip (Browser) Kit (includes tip and accessories) Product Code
WaveLink Dxx30-PT (10 GHz rating)Adjustable Positioner Tip Kit. For use with D830,
D1030, and D1330 amplifiers. Includes XYZ Positioner Assembly with Mechanical
Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and replacement
Pogo-Pin Tips (Qty. 2). Dxx30-PT-KIT
Positioner Tip (Browser) Kit, Dxx30-PT-KIT.
12 924234-00