Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) - Manual (Page 51)

Operator's Manual
Required Test Equipment
The following table lists the test equipment and accessories, or their equivalents, required for
performance verification of the WaveLink Medium Bandwidth Differential Probes.
Because the input and output connector types may vary on different brands and models of test
instruments, additional adapters or cables may be required.
Test Equipment Minimum Requirements Example Equipment
Oscilloscope Instrument bandwidth ≥ probe
warranted bandwidth
ProLink input
Teledyne LeCroy
WaveMaster 8 Zi/Zi-A
Digital Multimeter AC: 0.2% accuracy to measure
200 mV and 2 Vrms @ 1 kHz
6½ digit resolution Agilent Technologies 34401A
Fluke 8842A-09
Keithley 2001
Oscillator/
Function Generator Sine Wave output, adjustable
from 500 mV to 4 Vp-p (357 mV
to 2.83 Vrms) at 70 Hz Stanford Research DS340
Agilent Technologies 33120A
Leader LAG-120B
Calibration Fixture * Teledyne LeCroy PCF200
ProLink Adapter Teledyne LeCroy LPA-2.92
or LPA-SMA
SMA to BNC Adapter Pomona Electronics 4289
Pasternack Enterprises PE9073
SMA Coaxial Cable Pomona Electronics 4846-K-24
Pasternack Enterprises PE3369-36
* Standard accessory included with WL-PLINK-CASE.
924234-00 45