Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) - Manual (Page 41)

Operator's Manual
3. Locate the socket so the closed end is slightly overhanging the end of the pad. This prevents
solder from flowing into the socket insert hole. Align the socket sides with the pad sides and
solder as follows:
Leave proper clearance between the socket and pad sides when soldering.
4. Finally, clean the newly soldered assembly with deionized or distilled water.
Service Strategy
Defective products must be returned to a Teledyne LeCroy service facility for diagnosis and repair or
replacement. Defective products under warranty are repaired or replaced.
See "Service Options" on page 43 for more details.
924234-00 35