TREND 963 User Guide - Manual (Page 34)

Using 963
963 User Guide TC200635 Issue 3 25/03/2008 34
3.3.4 Relinquish Control of a BACnet Value
When 963 adjusts a value in a BACnet device it writes the value into the value's priority array. The value will
remain in the array, and be used when it is the highest. If required the 963's adjustment can be removed from the
array by relinquishing control.
Relinquish control of an analogue value:
1. Display the page containing the value for which you want to relinquish control, and click the button or
picture that enables the value to be changed.
Or
View the value for which you want to relinquish control in the Device Viewer, right-click the value, and
click Adjust Point.
2. At this point you may be asked if you are sure you want to make the adjustment click Yes.
A dialogue box is displayed.
3. Select the Relinquish control check box.
4. Click Enter.
Relinquish control of a digital value:
1. Display the page containing the value or which you want to relinquish control, and click the button or
picture that enables the value to be changed.
Or
View the value for which you want to relinquish control in the Device Viewer, right-click the value, and
click Adjust Point.
The Switch Adjuster dialogue box is displayed.
2. Select the Relinquish control option.
3. Click OK. The Adjust Point dialogue box is displayed.