TREND 963 User Guide - Manual (Page 40)

Using 963
963 User Guide TC200635 Issue 3 25/03/2008 40
3.4.5 Reset the Count of SMS Alarms
963 SMS Direct will generate an alarm when it has sent a specified number of SMS messages. When this occurs the
count of messages sent should be reset.
To reset the count of SMS alarms sent:
1. Run 963 and log on as someone with authority to configure SMS settings.
2. On the SMS menu click Properties. The SMS Management dialogue box is displayed.
3. Click Reset Count.
4. Click OK.
3.4.6 Run a Manual Alarm Action
Manual alarm actions enable a specific action to be run by the user when an alarm occurs. This gives the operator
control over the display and prevents the situation where 963 is too busy jumping to pages for the user to interact
with the rest of the system.
To run a manual alarm action:
1. Click in required alarm panel when it is displayed.
3.4.7 Print
3.4.7.1 Print Alarm Priority Statistics
It is possible to print the chart of the alarm priority statistics.
To print the alarm priority statistics:
1. View the Alarm Priority Statistics as described in the ‘View Alarm Priority Statistics’ section of this
manual.
2. Click Print. The Print dialogue box is displayed.
3. Select the required printer from the list.
Note that changing the printer from here will change the page printer used by 963 to print out pages,
graphs, and alarm priority statistics.