TREND 963 User Guide - Manual (Page 86)

Using 963
963 User Guide TC200635 Issue 3 25/03/2008 86
7. In the Name box enter the name for the template.
8. Specify the colour used to represent days that use these times by clicking Choose selecting the required
colour from the dialogue box that is displayed, and clicking OK.
9. Set up the operating times for the first period of occupancy on Monday as required by dragging each end of
the bar to specify the times. To add another period click and drag to the right, and then drag each end of
the bar to specify the times.
To set occupation for the whole day, right-click the day and on the displayed menu On all day. To set non-
occupation for the whole day, right-click the day and click Off all day.
The times can be specified by clicking the required period or and right-clicking and on the displayed menu
Next Period or Last Period from the menu. The start and stop times for the period can then be specified
by entering them in the Start Hours, Start Minutes, Stop Hours, and Stop Minutes boxes.
10. Repeat step (9) for the rest of the rest of the days in the week.
Occupation times from one day can be copied and then pasted to another day, or the entire week, by right-
clicking the day whose times are to be copied, clicking Copy Day, then right-clicking the day to which the
times are to be pasted, and clicking Paste Day. To paste the times to the entire week right-click and click
Paste for week, and to paste them just to the working week (Monday to Friday) week right-click and click
Paste for working week.
A single period can be copied by right-clicking it, and clicking Copy, it can then be pasted where required
in a similar way to pasting the entire day.
To set occupation for the entire week, right-click and on the displayed menu On all week. To set non-
occupation for the entire week, right-click and on the displayed menu click Off all week.
Existing times can be loaded as described in the ‘Load Existing Times’ section of this manual, or loaded
from a controller as described in the ‘Load Times From a Controller’ section of this manual.
11. Once the occupation times are correctly set up, click OK. A dialogue box asking if you want to download
the changes now or configure the scheduler to do it later is displayed, click the required option and then
click OK.