TREND 963 User Guide - Manual (Page 39)

Using 963
963 User Guide TC200635 Issue 3 25/03/2008 39
4. In the box enter some text describing the action to assist future faultfinding (e.g. the action taken because of
the alarm).
5. Click OK.
3.4.2.2 Action Alarms from the Alarm Viewer
Alarms can be actioned from the Alarm Viewer.
To action alarms:
1. View the alarm(s) that are to be actioned as described in the ‘View Alarms’ section of this manual.
2. Click the alarm(s) that are to be actioned. To select more than one alarm hold down the CTRL key and
click the required alarms.
3. Right-click any of the selected alarms, and click Action Selected Alarms. The User Text dialogue box is
displayed.
4. In the box enter some text describing the action to assist future faultfinding (e.g. the action taken because of
the alarm).
5. Click OK.
3.4.3 Hide Alarm Panels
If an alarm has caused an alarm panel to be displayed it is possible to hide the alarm panel for 2 minutes if it is not
currently convenient to deal with the alarm e.g. you are currently working on something else that is more important.
To hide the current alarm panel:
1. Click on the alarm panel that is to be hidden.
To hide all alarm panels:
1. Click on any alarm panel.
3.4.4 Mute an Alarm Panel
If an alarm has caused an alarm panel that is set to beep to be displayed it is possible to mute the beep.
To mute the beep:
1. Click on the alarm panel that is to be muted. Clicking the button again will cause the beep to be
restarted.