ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 103)

Configuring Heart Rate (HR) Meter Alarms
9650-001355-01 Rev. H X Series Operator’s Guide 7-7
Life Threatening Rhythm Alarms
When LTA monitoring is enabled, the X Series unit will monitor for the following life
threatening ECG rhythms: asystole, ventricular fibrillation, ventricular tachycardia, extreme
bradycardia, and extreme tachycardia. These events are also displayed on Treatment Summary
Reports, Alarm Snapshots, and Continuous Waveform printouts.
The following example shows an Asystole alarm event:
To enable or disable LTA alarms and set Extreme Brady/Tachy alarm limits, you can either do
so through the Alarms quick access key ( ), or the HR/PR Parameter Control Panel.
To configure LTA alarms through the Alarms quick access key:
1. Press .
2. Press .
3. Press . Use the navigation keys to highlight and select the fields that you want to change:
• LTA Monitoring
• Extreme Brady/Tachy Alarms
When you are finished changing values on the alarm menu, navigate to the Backarrow key to
confirm your choices and exit the menu.
Limits