SaltDogg WB200A - Manual (Page 12)

1
by Buyers
16. Using two m6x70 bolts, attach the Handle(9) and
Control Handle Assembly(7) to the frame.
17. Attach the Upper Linkage(10) to the control handle
assembly and the linkage plate assembly.
Note: The second jam nut must be removed in order to
mount the upper linkage to the linkage plate assembly.
M6x70
7
10
9
STOP BOLT
UPPER CONTROL ROD
MAY BE MOUNTED ON
INSIDE OR OUTSIDE OF
CONTROL HANDLE
NOTE: THE HANDLE HEIGHT
IS ADJUSTABLE. ANY TWO
HOLES NEXT TO EACH
OTHER MAY BE USED AS
LONG AS BOTH BOLTS GO
THROUGH THE HOLES IN THE
UPPER FRAME ALSO.
M6x70