SaltDogg WB200A - Manual (Page 3)


by Buyers
M6x40 (5)
M6x20 (2)
M6x45 (3)
M6x60 (4)
M6x70 (2)
M6x50 (4)
Fastener Selection Guide
Bill of Materials (for all figures)
WB100A = CS / WB200A = SST
ITEM PART NO. QTY DESCRIPTION
1 3009153cs/sst 1 UPPER FRAME ASSY
3007853cs/sst 2 Upper Frame
— 1 M6x60 Hex Head Cap Screw
— 1 M6 Locking Nut
2 3009154cs/sst 1 LOWER FRAME ASSY
3009168cs/sst 1 Lower Frame (Left)
3009169cs/sst 1 Lower Frame (Right)
3007857cs/sst 1 Long Crossmember
— 2 M6x40 Hex Head Cap Screw
— 2 M6 Locking Nut
3 3009155cs/sst 1 HOPPER SUPPORT ASSY
3007856cs/sst 2 Hopper Support
3009171cs/sst 1 Short Crossmember
— 2 M6x40 Hex Head Cap Screw
— 2 M6 Locking Nut
4 3009156 1 HOPPER ASSY
3009144 1 Hopper
3009162 1 Restrictor Assembly
5 3009157 1 SPINNER ASSY
3009150 1 Spinner Shaft
3007863 1 Spinner
— 1 Cotter Pin
3008882 1 Support Bracket
3008892 1 Bushing
3009364 1 Spacer
3008879 1 Pinion Gear
— 1 Spring Pin
6 3008142 1 DEFLECTOR ASSY
— 3 M6 Wing Nut
3007877 1 Long Deflector
3007878 2 Short Deflector
3007879 1 Deflector Rod
3007880 2 Deflector Hanger
— 5 M6x20 Carriage Bolt
— 2 M6 Locking Nut
7 3009160 1 CONTROL HANDLE ASSY
3009172 1 Control Handle
3007868 1 Plastic Washer
3007869 1 Control Plate
3007876 1 Stop Spacer
— 2 M6 Wing Nut
— 1 M6x20 Carriage Bolt
8 3009163cs/sst 1 REAR DEFLECTOR ASSY
3008812cs/sst 1 Mounting Bracket
3007877 1 Long Deflector
— 1 M6x20 Carriage Bolt
— 1 M6 Wing Nut
9 3009159cs/sst 1 HANDLE
10 3009173 1 UPPER LINKAGE
11 3009174 1 LOWER LINKAGE
12 3007862 1 DRIVE WHEEL
13 3008135 1 COAST WHEEL
14 3009158 1 AXLE
15 3008880 1 DRIVE GEAR
16 3009175 1 LINKAGE PLATE ASSY
17 3009170cs/sst 2 HOPPER SUPPORT BRACKET
18 3008813 1 SCREEN
19 3007993 1 RAIN COVER
3009161 1 HARDWARE BAG
20 3008881 1 SPINNER SHAFT SUPPORT
21 — 6 SHIM WASHER
22 — 3 AXLE BUSHING
23 — 2 COTTER PIN
— 5 M6x40 Hex Head Cap Screw
— 3 M6x45 Hex Head Cap Screw
— 4 M6x60 Hex Head Cap Screw
— 2 M6x70 Hex Head Cap Screw
— 4 M6x50 Machine Screw
— 2 M6 Flat Washer
— 20 M6 Locking Nut
— 2 Jam Nut
— 2 M6x20 Hex Head Cap Screw
24 3009767 2 LOCKING COLLARS
3009768 1 Allen Wrench
FULL ONE YEAR WARRANtY
Manufacturer will repair, or at manufacturer’s discretion will replace
any part of this salt spreader which proves to be defective in work-
manship or material under normal use for a period of one year from
the date of delivery to the original purchaser. Any cost incurred
in returning the product to the supplier is the responsibility of the
consumer.
ExcLUSiONS
Manufacturer shall not be liable for special, incidental, or consequen-
tial damages, or for damages resulting from lack of necessary mainte-
nance, from misuse, abuse, acts of God, or alteration of the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not
apply to you.
tOOLS NEEDED FOR ASSEMBLY
• (2) 10mm Wrenches
• (2) ½" Wrenches
• (1) Slotted Screwdriver
• (1) Pliers
• (1) 3mm Allen Wrench (included)