AMX Metreau Entry Communicator with Display MET-ECOM-D - Manual (Page 13)

Positioning the Camera
7 Metreau Entry Communicators
Positioning the Camera
Overview
The camera on the Metreau Entry Communicators provides a symmetrical 42° viewing angle, and by
default the camera is centered. The Metreau Entry Communicators feature a Camera Viewing Angle
Adjustment slider on the rear panel of the unit that allows you to adjust the viewing angle horizontally
from -15° to 15°.
FIG. 4 indicates the viewing range of the integrated camera in the Metreau Entry Communicators.
The camera on the Metreau Entry Communicators provides a symmetrical 42° viewing angle, and by
default, the camera is centered.
Camera Viewing Angle Adjustment
The Camera Viewing Angle Adjustment slider is located on the rear panel of the unit, and is intended to
be used at the time of installation. It is not intended to be used for regular periodic adjustments. Once a
final installation location has been established, use the Camera Viewing Angle Adjustment slider to set
the desired camera angle, then finalize the installation.
The camera on the MET-COM-D can be adjusted horizontally from -15° to 15°, via the Camera Viewing
Angle Adjustment slider, as illustrated in FIG. 5:
FIG. 4 Viewing range of the integrated camera (side view)
42° Camera
(front) (rear)
mounting
surface
The Camera Viewing Angle Adjustment slider is mechanical, and does not require
power to the unit to use.