AMX Metreau Entry Communicator with Display MET-ECOM-D - Manual (Page 31)

Mounting and Installation
25 Metreau Entry Communicators
Using the Optional Surface Mount Box
The CB-MET-ECOMS (-S/-B) Surface Mount Box Kit for Metreau Entry Communicators is available
for situations where it is undesirable or impossible to install the conduit box into the mounting surface. It
is available in two colors:
CB-MET-ECOMS-S - paintable Silver (FG039-14-S)
CB-MET-ECOMS-B - Black (FG039-14-B)
The Surface Mounting Box (FIG. 1) allows the Metreau Entry Communicators to be surface-mounted,
with the back panel of the mounting box flush against the surface and the unit protruding.
Included in the Kit
CB-MET-ECOMS Surface Mount Box
1 Cat5 Suppression Ferrite
2 mounting screws
FIG. 21 Surface Mounting Box
Front
Rear
Conduit
Mounting
Screw Holes
Routing Hole
Mounting tabs
mounting clip