AMX Metreau Entry Communicator with Display MET-ECOM-D - Manual (Page 78)

Using the NetLinx Module
72 Metreau Entry Communicators
Setup page
Sample Intercom Page (Cont.)
No. Name Description Channel
Port:Code
Address
Port:Code
Level
Port:Code
27 Monitor Panel Display only; indicates the
panel is being monitored by
another panel. 1:35
28 Intercom Microphone Level A Bargraph in TPDesign4 that
sets the volume of the intercom
microphone. 0:10
29 Intercom Sound Level A Bargraph in TPDesign4 that
sets the volume of the intercom
speaker. 0:9
30 Call Status Button Displays status of calls, e.g.,
incoming caller id,
connected, rejected. 1:10
31 Navigate Up Increments the intercom
directory up. 1:13
32 Navigate Down Increments the intercom
directory down. 1:14
33 Intercom Setup Page Navigates the intercom panel
to the intercom Setup page.
This requires a standard page
flip to Setup.
Setup
Name Description Channel
Port:Code
Address
Port:Code
Auto-Answer OFF Toggle the panel’s auto-answer feature off and on. 1:12
Session Timeout A display of the current session timeout. 1:9
Increment Up Increments the intercom session time up. 1:15
Increment Down Increments the intercom session time down. 1:16
Room Name The name of the panel as it appears in other intercom
directories. See Naming a panel section on page 66. 0:265
Door Setup Navigates to the Door Setup page. This requires a standard
page flip to Door Setup.
Advanced Setup Navigates to the intercom Advanced Setup page. This
requires a standard page flip to Advanced Setup.
Exit Setup Navigates to the intercom directory page. This requires a
standard page flip to the intercom directory.