AMX Metreau Entry Communicator with Display MET-ECOM-D - Manual (Page 49)

Using the Configuration Manager
43 Metreau Entry Communicators
Audio/Video Page
Audio/Video Page - Audio Settings Tab
Click on the Audio tab of the Audio/Video Page to access the Audio Settings tab (FIG. 39). Use the
options in this tab to view/edit audio-specific settings.
Setting Device Audio
1. In the Audio/Video page, select the Audio tab.
2. Click the radio button to select the Audio Codec type.
3. Use the sliders to set the Speaker and Mic volume levels. Place a check in each box to mute these
options.
4. Click Accept.
FIG. 39 Audio/Video Page - Audio Settings tab
Audio/Video Page - Audio Settings Tab
Audio Codec
G.711 Codec An ITU-T standard for audio companding.
• ALAW - A standard companding algorithm used in European digital communications
systems to optimize the dynamic range of an analog signal for digitizing.
• ULAW - A companding algorithm primarily used in the digital telecommunication systems
of North America and Japan.
Note: Do not change the Audio Codec setting during a call.
Audio Levels
Speaker Volume The volume level for the speaker on the device. (1 - 100)
• Mute - mutes the volume on the speaker.
Mic Volume The volume level for the mic on the device. (1 - 100)
• Mute - mutes the mic.