Proface FP3900 - 19 Flat Panel" - Manual (Page 2)

2
„ Qualified Product (UL File No.E220851, CSA File No.219866)
The following units are UL/c-UL/CSA listed products.
(UL File No.E220851, CSA File No.219866)
These products conform to the following standards:
• UL508 Industrial Control Equipment
• CSA-C22.2, No.142-M1987 Process Control Equipment
„ Qualified Product (UL File No.E171486)
The following unit is UL/c-UL recognized products. (UL File No.E171486)
This product conforms to the following standards:
• UL60950-1 (First Edition)
Information Technology Equipment - Safety-Part 1: General Requirement
• CSA-C22.2, No.60950-1-03(c-UL Approval)
Information Technology Equipment - Safety-Part 1: General Requirement
„ Cautions
Be aware of the following items when building the FP into an end-use product:
• The FP must be used as a built-in component of an end-use product.
• This unit should be installed in the front face of a metal panel.
• If this unit is installed so as to cool itself naturally, be sure to install it in a
vertical panel. Also, be sure that the FP unit is mounted at least 100 mm away
from any adjacent structures or equipment. If these requirements are not met,
the heat generated by the FP unit’s internal components may cause the unit to
fail to meet UL/c-UL standard.
• For use in Pollution Degree 2 environment.
• For use on flat surface of a Type1 enclosure (FP3500-T41-24V/FP3600-T41-
24V only).
UL/c-UL/CSA Application Notes
Model Type UL/c-UL/CSA Registration Model No.
FP3500-T41-24V 3580403-02
FP3600-T41-24V 3580404-02
Model Type UL/c-UL Registration Model No.
FP3650-T41 3580405-01