Proface FP3900 - 19 Flat Panel" - Manual (Page 5)

5
The Dip Switches and Slide Switch are located in the bottom of the FP unit. Only
the settings when the power supply is turned on is effective to the Dip Switches
and the Slide Switch. After changing the settings of the Dip Switches and the
Slide Switch, be sure to restart your FP unit
„ SW1
• SW1-2 Dip Switch SW1-2 is used to display or hide the OSD.
To hide the OSD, set the switch to ON. To display the OSD, set the switch to
OFF.
The default setting is OFF. (OSD is displayed.)
„ SW2
2 Dimensions
3 Dip Switches and Slide Switch
Switch Setting
SW1-1 Reserved (Always OFF) SW1-5 Reserved (Always OFF)
SW1-2 Display/Hide the OSD
SW1-6 Reserved (Always OFF)
SW1-3 Reserved (Always OFF) SW1-7 Reserved (Always OFF)
SW1-4 Reserved (Always OFF) SW1-8 Reserved (Always OFF)
Switch Setting
Slide Switch is used to switch the data input/output
(command control) method on the touch panel between
USB and RS-232C (Serial).
The default setting is RS-232C.
301[11.85]
227[8.94]
58[2.28]
317[12.48]
243[9.57]
317[12.48]
243[9.57]
8[0.31]
Top View
Front View
Side View
Unit: mm [in]
Front View
(FP3500-T11/FP3500-T41-24V)
(FP3600-T11
/FP3600-T41-24V
/FP3650-T41)
Dip Switches(SW1)
Slide Switch(SW2)
Bottom View
(This model is FP3600-T11.)
1 2 3 4 5 6 7 8
ON
USB 232