Appendix 2. link master functions, A2.1 link active scheduler, A2.2 link master – Yokogawa YVP110 User Manual

Page 130: A2.3 transfer of las, A2.1, A2.2, A2.3, A-19

Advertising
background image

<Appendix 2. Link Master Functions>

A-19

IM 21B04C01-01E

Appendix 2. Link Master Functions

A2.1 Link Active Scheduler

A link active scheduler (LAS) is a deterministic, centralized bus scheduler that can control communications on

an H1 fieldbus segment. There is only one LAS on an H1 fieldbus segment.
A YVP supports the following LAS functions.

• PN transmission: Identifies a fieldbus device newly connected to the same fieldbus segment. PN is short

for Probe Node.

• PT transmission: Passes a token governing the right to transmit, to a fieldbus device on the same

segment. PT is short for Pass Token.

• CD transmission: Carry out a scheduled transmission to a fieldbus device on the same segment. CD is

short for Compel Data.

• Time synchronization: Periodically transmits the time data to all fieldbus devices on the segment and

returns the time data in response to a request from a device.

• Live list equalization: Sends the live list data to link masters on the same segment.

• LAS transfer: Transfers the right to be the LAS on the segment to another link master.

A2.2 Link Master

A link master (LM) is any device containing a link active scheduler. There must be at least one LM on a

segment. When the LAS on a segment has failed, another LM on the same segment starts working as the

LAS.

LM

Node address: 0x15

SlotTime = 5

LM

Node address: 0x16

SlotTime = 5

Node address: 0x14

SlotTime = 5

Basic device

Node address: 0xF1

Basic device

Node address: 0xF2

Basic device

Node address: 0xF3

Basic device

Node address: 0xF4

LAS

There are 3 LMs on this segment.

LM

FA0201.ai

Figure 1.

Example of Fieldbus configuration-3 LMs on Same Segment

A2.3 Transfer of LAS

There are two procedures for an LM to become the LAS:

• If the LM whose value of [V(ST)×V(TN)] is the smallest on a segment, with the exception of the current

LAS, judges that there is no LAS on the segment, in such a case as when the segment has started up or

when the current LAS has failed, the LM declares itself as the LAS, then becomes the LAS. (With this

procedure, an LM backs up the LAS as shown in the following figure.)

• The LM whose value of [V(ST)×V(TN)] is the smallest on a segment, with the exception of the current LAS,

requests the LAS on the same segment to transfer the right of being the LAS, then becomes the LAS.

LM

Node address: 0x15

SlotTime = 5

LM

Node address: 0x16

SlotTime = 5

Node address: 0x14

SlotTime = 5

Basic device

Node address: 0xF1

Basic device

Node address: 0xF2

Basic device

Node address: 0xF3

Basic device

Node address: 0xF4

LAS

LAS

In the event that the current LAS in this segment

(node address 0x14) fails, the LM with the address

of 0x15 takes its place to become the LAS.

LM

FA0202.ai

Figure 2.

Backup of LAS

Advertising