Yokogawa Removable Chassis DX1000N - Manual (Page 16)

1-10
IM 04L41B01-04E
Display When Components Overlap on the Execution Screen
Limitations (A, B, and C) apply when components overlap on the execution screen. If
components with the same overlap restriction are overlapping, components placed under
the front component (i.e., in the background) are not displayed.
Overlap restriction Component name (attribute conditions)
None Digital, bar, scale (kind: OFF), label, tag No., tag comment, simple
digital, simple bar graph, alarm mark, units, alarm indicator, span
lower limit, span upper limit, group name, system icon, memory bar,
time label, batch group no., batch name, line, rectangle, circle, push
button, switch, comment box, comment block, communication input,
Modbus imput
A Scale (kind: ON)
Alarm list
Message list
B (*) Scale (kind: bitmap), bitmap
C Trend
* Overlap restriction B only shows the front component even on the builder screen.
For example, if two components with Overlap restriction A are overlapping on the builder
screen, only the front component is displayed on the execution screen.
Front Back
Overlapping of Components
As in the figure below, when components A and B are placed side-by-side on the same
grid, their sides overlap by 1 dot in width.
Grid Component A Component B
1.4 Create Components