Yokogawa Removable Chassis DX1000N - Manual (Page 26)

1-20
IM 04L41B01-04E
Example for Group Control Settings
In the screen showing a bar graph of the measured values from 2 channels, the
measured values displayed depend on the display groups as follows: display group 1 =
ch 1 and ch 2; display group 2 = ch 3 and ch 4; display group 3 = ch 5 and ch 6; display
group 4 = ch 7 and ch 8.
Tag (ID: 0)
Simple digital (ID: 2)
Span upper limit (ID: 3)
Simple bar (ID: 4)
Span lower limit (ID: 5)
Tag (ID: 1)
Simple digital (ID: 6)
Span upper limit (ID: 7)
Simple bar (ID: 8)
Span lower limit (ID: 9)
Display group 1 shows: Channel 001 Channel 002
Display group 2 shows: Channel 003 Channel 004
Display group 3 shows: Channel 005 Channel 006
Display group 4 shows: Channel 007 Channel 008
• Setup Screen and Setup Items
Display Group Settings
Press
MENU (to switch to setting mode), and select the Menu tab > Group set, Trip
line
Group number CH set
1
001.002
2 003.004
3 005.006
4 007.008
Group 5 and group 6 are set to Off.
1.11 Register Components in the GR. CTRL