Yokogawa Removable Chassis DX1000N - Manual (Page 32)

2-2
IM 04L41B01-04E
2.2 Common Attributes of Components
This section explains the common attributes used for multiple components.
Attribute Settings
To fix the setting value, select [OK] in the attribute setting dialog after you have changed
the settings of component attributes.
Selection
You will see a selection [SET] in the attribute settings. This indicates a value
configured at the setting menu of this device.
Font
The following character types are available.
Font
(character size) Description
Font 5
English one-byte characters.
ISO8859-1 (Some symbols are not available.)
Font 6
Font 8
Font 12
Font 16
Font 32
Batch Group Number (Additional Specification/BT2: Multi batch Functions Only)
This is an attribute you will be able to configure with trend components, scale components,
message list components, alarm list components, Multi batch number components,
batch name components and GR CTRL 1 to 4. You can set this attribute when the Multi
batch function is turned on. The batch group number configured will be validated when
you display a custom display screen in the
batch overview mode. When you display a
custom display screen in the batch single mode, the batch group number configured at
the attribute will be ignored. In this case, the effective batch group number is that of the
individual batch mode.
Frame
Set the frame of components. You can select [None], [Black], [White], [Raised], or
[Sunken].
None Black White Raised Sunken
[None]: no frame; [Black]: solid line black frame; [White]: solid line white frame; [Raised]:
convex shaped frame; [Sunken]: concave shaped frame
Depend ID
Set the component ID on which this component is dependent. You can set this field as
[None] or select an ID number of the components on the screen. For example, if you
have the following components whose IDs are 0 to 3 on the [Builder screen], the IDs you
will be able to configure are shown in the below table.
ID
0
1
2
3 None
None
None
None 1
2
3
0
Configurable ID
2
3
1
3
2
0 ID
Depend on 1
1 2 3
Depend on 2
You can also configure dependent IDs using the soft key. See section 1.10 for more
information about dependent IDs.