App index – Yokogawa Removable Chassis DX1000N User Manual
Page 25
1-19
IM 04L41B01-04E
Overview and Basic Operations
1
2
3
App
Index
Switching groups
On: When you press the left or right key in the execution panel, the group number
display switches.
Off: If you press the left or right key in the execution panel, the group number display
does not switch.
Order
It is an order of channel configured for each display group. For example, if “003, 004,
005” is configured for display group 1, the order 1 of group number 1 is CH3, the order
2 corresponds to CH4, and the order 3 corresponds to CH5 respectively.
Setting range: 1 to 6 for DX1000 and 1 to 10 for DX2000
Here is the explanation using the display group setting and the dialog below as an
example.
A channel configured at the first channel in the display group 1 will be assigned to the ID
registered in the order of (0, 6, 7, 8, 9), which is registered at the order 1 of group number 1.
You can also switch groups using the left and right arrow keys on the execution screen.
(You can switch channels of components registered at the order 1, which is in the order
of “1”, “7”, “3”, and “101”.)
Display Group Setting Example
Group number
Order
1
2
3
4
1
1
7
3
101
2
2
8
5
102
3
3
9
8
No setting
4
4
10
1
No setting
5
5
11
4
No setting
6
6
12
7
No setting
In the bold frame, you will see channels assigned for each display group.
If “no setting” is assigned to a component, only the frame is displayed. For example,
only the frame will be displayed for the component (ID) registered at the order 3 of
group number 4.
Channel 1 is assigned.
Channel 2 is assigned.
Channel 3 is assigned.
Channel 4 is assigned.
Channel 5 is assigned.
Channel 6 is assigned.
1.11 Register Components in the GR. CTRL