Yokogawa Removable Chassis DX1000N - Manual (Page 91)

2-61
IM 04L41B01-04E
Advanced Settings of Screen and Component
1
2
3
App
Index
Attribute Description Default value
Decimal place Sets the decimal place of the device that you have
connected using Modbus by the specification of the
number of digits to the right of the decimal point. You
can match the decimal place of the DX to the fixed
decimal place of the connected device to display input
values or, using action functions, write values to the
device.
If the input value cannot be displayed using five digits,
the sixth digit is rounded to display five significant digits
in scientific notation.
Range: [0] to [4]
Example: If there are two decimal places
Setting value: 2
Displayed value: 123.45
0
Minimum Sets the lower limit of the numerical value that can
be input for the minimum. If a value larger than the
maximum is set, the maximum takes the same value
as the minimum.
Selectable range: -9.9999E+29 to -1.0000E-30
0
1.0000E-30 to 9.9999E+29
-9.9999E+29
Maximum Sets the upper limit of the numerical value that can be
input.
If a value smaller than the minimum is set, the
minimum takes the same value as the maximum.
Selectable range: -9.9999E+29 to -1.0000E-30
0
1.0000E-30 to 9.9999E+29
9.9999E+29
Depend ID Sets the ID number of the component on which this
component is dependent. See Section 2.2.
None
Visible Sets [On] or [Off] to indicate whether or not this
component is displayed. See Section 2.2.
On
Sync act See Section 2.2.
2.32 Attributes of Modbus In Components