Ol2252 pulse input cont’d, Input signal – Nematron OptiLogic Series User Manual
Page 24
Advertising
Optimation, Inc.
(256)883-3050
24
OptiLogic Series
OL2252 Pulse Input cont’d
Input Signal
The input pulse train is a repetitive
square wave input that looks something like the
following.
If you know the maximum frequency of
the pulse train, you can configure the pulse
counter to count pulse up to that pulse rate. In
doing so, the counter will consider anything
above the maximum rate that you have defined
to be noise and will ignore it.
1 count
Advertising