Nematron OptiLogic Series - Manual (Page 25)

Optimation, Inc. (256)883-3050 25
www.optimate.com
OptiLogic Series
OL2258 High Speed Pulse Counter
Inputs (all) 4
Card Cage Power
Required
100 mA
Pulse Inputs 2 Status Indicators Logic side LED
Input signal type
Sinking, sourcing or
differential
Input Impedance 2.0K ohms nominal
Input frequency (on
pulse inputs) 80/160 KHz
maximum
Count value 32 bit signed integer
Min. Input On Voltage
(or differential)
4.00V Frequency data
16 bit signed integer
(Configurable for 1
second or 200 mS count)
Max. Input Off Voltage
(or differential)
3.00V Counting Modes
Pulse & Direction
Up/Down Count
Quadrature
Max. Input voltage 28V
Outputs 2
Max terminal wire
gauge 18 AWG (use copper
conductors)
Output Type Open collector Terminal Strip Plug In (removable)
Max Output current 300 mA Terminal Screws Slotted (0.1
” blade max.)
Output Voltage range 0 - 40VDC
Required Temperature
rating of field installed
conductors
60
C/75C
Weight 1.24 oz (35g) Terminal block torque 2.2 lb-in
Type 82 Subtype 1
The OptiLogic OL2258 High Speed Pulse Counter module provides for direct pulse
counting for a variety of high speed pulse interface applications. Typical applications include
motion control, metering and velocity measurement. The OL2258 contains on board intelligence
necessary for processing and counting pulse information as well as automatically triggering control
outputs.
The OL2258 can be configured configured to operate in one of three pulse counting modes.
These modes are 1) Pulse & Direction, 2)Up/Down Count and 3) Quadrature . Pulse & Direction
and Up/Down count will operate at up to 80KHz input pulse rates. Quadrature inputs count each
quadrature state transitions at up to 160 KHz. Additionally, the OL2258 will return frequency
information.