Sprint PPC-6600 - Manual (Page 17)

12
Section 1: Getting Started
AC Adapter plugs into
the back of the cradle for
battery recharging
1.4 Accessories
USB Cradle
Your PPC6600 comes with a USB cradle which allows you to
connect to an available USB port on your desktop PC to run
ActiveSync and to recharge your device with the supplied AC
Adapter.
To view the battery status:
 Tap > Settings > System tab > Power.
Note:
Always ensure that the backup battery remains at least 50%
charged.
Note:
For battery recharging, you must plug the AC Adapter into the back
of the cradle.
Note:
To synchronize, the USB Cradle must be plugged into an available
USB port on your PC.
When Your Battery is Low
When the low battery warning message appears, immediately
save any data you are working on, perform a synchronization
with your PC (see page 55), then turn off your PPC6600. If
your device does shut down, the backup portion of your main
battery will protect data for up to 72 hours.