Sprint PPC-6600 - Manual (Page 75)

70
Section 6: Personalizing Your PPC6600
The Storage Card tab displays how much memory is
available on the storage card that is inserted into your
device. If you have more than one card inserted, tap the list
box and then the name of the storage card whose
information you want to view.
The Running Programs tab displays the list of currently active
programs. You can stop a program by selecting it in the list
and then tapping
Stop, or just tap Stop All to stop all the
running programs.
Note:
You may need to stop a program if it becomes unstable or program
memory is low.
Power

Tap > Settings > System tab > Power.
The Battery tab displays the amount of battery power
remaining. Battery power depends on the battery type and
how the device is being used.
On the Advanced tab, you can select options for turning off
your device to conserve battery power. To conserve the
most power, select the option that turns off the device after
3 minutes or less.
Permanent Save
You can choose to back up Contacts and Appointments, Tasks,
and Connection Settings to non-volatile memory. Backing them
up in this way means they will not be lost in the event your
device loses all power or you have to perform a full reset.
To back up to FlashROM:
1. Tap > Settings > System tab > Permanent Save.
2. Select the desired items by checking the boxes, then
tap OK to start backup.
To restore to FlashROM:
1. Tap > Settings > System tab> Permanent Save.
2. Select the desired items by checking the boxes, then
tap OK to start restoring.