Sprint PPC-6600 - Manual (Page 77)

72
Section 6: Personalizing Your PPC6600
Add Ring Tone
Add Ring Tone allows you to quickly find and display all the ring tones
stored on your device, gives you the option to listen, and then add
or remove them from the Phone Settings list mentioned above.
1. To display all ring tones on your device, you can
tap
> Settings > System tab > Add Ring Tone. (The program
will automatically list and display all the .wav and .mid files
on your PPC6600.)
2. After the ring tones have loaded, you can see that some are
already selected; these are presently listed in the phone
settings.
3. To play a ring tone, select one by tapping it, and then tap
play. If you don’t like the ring tone, deselect it; this will add/
remove the selected/deselected ring tones from the list in
your phone settings.
Keypad Tone
You can change the tone you hear when entering a phone number
on the keypad. If set to Tones, the tone is heard continuously for
as long as the number on the keypad is pressed. If set to Beep, the
tone is heard only for one or two seconds.
1. Tap the Keypad list, then select the option you want.
2. To prevent tones from being heard when entering a phone
number, select
Off.