Sprint PPC-6600 - Manual (Page 93)

88
Section 8: Getting Connected
4. Wireless connections can be made via a mobile phone
network or CDMA. If you are using a mobile phone
network to connect, in the
Select a modem list, tap
Cellular Line.
5. To view additional information for any screen, tap .
6. To start the connection, begin using the desired program.
For example, switch to Pocket Internet Explorer and
browse to a Web page. Your device will automatically
connect.
Note:
To change modem connection settings, in either Sprint or My
Work Network, tap Manage existing connections. Select the
desired modem connection, tap Settings, and follow the
instructions on the screen.
Setting up a WAP Gateway
To access WAP sites through Pocket Internet Explorer, configure
your device to use a WAP gateway. Use the following steps to
create a new set of connections to the Internet with WAP gateway
settings.
1. Get the following information from Sprint:

ISP server phone number, user name, and password.
Also, contact Sprint and ask for your WAP gateway
server name and port number.
2. Tap > Settings > Connections tab> Connections > Tasks tab.
3. Tap Edit my proxy server. If a proxy server has not been set
up, tap
Set up my proxy server.
4. In Programs that should automatically connect to and use the
Internet, tap New and enter a name for the ISP connection.
5. On the Proxy Settings tab, select This network connects to the
Internet and This network uses a proxy server to connect to the
Internet.
6. If necessary, in the Proxy server box, enter the proxy server
name.
7. Tap Advanced.