Sprint PPC-6600 - Manual (Page 92)

87
Section 8: Getting Connected
8.1 About Connections
You can set up connections to the Internet and corporate
network at work in order to do activities such as browsing the
Internet or intranet, sending and receiving e-mail and instant
messages, and synchronizing information.
Connections can be made using a modem, wireless network, or
network (Ethernet) card. A modem connection can be used to
set up connections with an external modem, or through your
service network using a cellular line.
Your PPC6600 has two groups of connection settings: Sprint
and My Work Network. The Sprint settings are used to connect
to the Internet, and My Work Network settings can be used to
connect to any private network, such as a corporate network
you use at work. Simply fill in the settings and you’ll be ready
to start connecting.
8.2 Connecting to the Internet
You can use Sprint settings to connect to the Internet and use
the connection to send and receive e-mail messages and view
Web pages.
Connecting to the Internet via Sprint
1. Obtain the following information from Sprint:
- ISP server phone number.
- User name.
- Password.
- Access point name.
2. Tap > Settings > Connections tab > Connections
3. To create a new connection, in Sprint, tap Add a new
modem connection, and follow the instructions in the Make
New Connection Wizard.
Note:
Your PPC6600 has been pre-set with a Sprint PCS Vision connection
as its primary modem connection. In most cases, you will not need to
perform the steps below.