Sprint PPC-6600 - Manual (Page 47)

42
Section 3: Sprint PCS Service Features
3.4 In-Call Options
Your device notifies you when you have another incoming
call and gives you the choice of rejecting or accepting the
call. If you accept, you can choose to switch between the
two callers.
To answer a call waiting call:
1. When a call comes in while you are on another call,
press or tap to put the first caller on hold
and answer the second call.
2. To end the 2 nd call and go back to the 1 st , tap or
press
.
To swap between calls:
 You can choose to swap backwards and forwards
between 2 callers by tapping or pressing .
To make a three-way call:
1. Enter a number you wish to call and press or
tap .
2. Once you have established the connection, Press or
tap . (This puts the first call on hold.)
3. Enter the second number you wish to call and
press or tap .
3.3 Receiving a Call
To answer an incoming call:

Tap Answer, or press on your device.
(Tap Ignore or
press to reject the call. )
Note: If you reject a call, the busy tone will be sent out.
To end a call:
 When on a call, press or tap to end the call.