Brocade TurboIron 24X Series Hardware Installation Guide - Manual (Page 64)

54 Brocade TurboIron 24X Series Hardware Installation Guide
53-1002981-01
Device specifications
A
NOTE
SMF = Single Mode Fiber, MMF = Multi-Mode Fiber.
TABLE 12 Cable length summary
Cable Type Connector Type Core Diameter
(microns) Modal Bandwidth
(MHz*km) or
Wavelength (nm) Range (meters)
1000Base-BX-D Single-mode
Fiber (SMF) LC connector for
SFP module 9 1490 nm 2 - 10000
(10 km)
1000Base-BX-U SMF LC connector for
SFP module 9 1310 nm 2 - 10000
(10 km)
1000Base-LHA SMF LC connector for
SFP module 9 1550 nm 2 - 70000
(70 km)
1000Base-LHB SMF LC connector for
SFP module 9 1550 nm 2 - 120000
(120 km)
1000Base-LX Multi-mode
Fiber (MMF) LC connector for
SFP module 62.5 500 2 - 550
MMF 50 400 2 - 550
MMF 50 500 2 - 550
SMF 9 1300 nm 2 - 10000
1000Base-SX MMF LC connector for
SFP module 62.5/125 200 .5 - 275
MMF 62.5/125 500 .5 - 550
MMF 50/125 900 .5 - 595
MMF 50/125 1500 .5 - 740
MMF 50/125 2000 .5 - 860
1000Base-SX 2 MMF LC connector for
SFP module 62.5 500 up to 2000
(2 km)
1000Base-T Copper RJ-45 jack for
standard
unshielded
twisted pair
(UTP/ Category
5) n/a n/a up to 100
meters
10GBase-LR SMF LC connector for
XFP module 9 1310 nm 2 - 10000
(10 km)
10GBase-SR MMF LC connector for
XFP module 62.5/125 160 2 - 26
MMF 62.5/125 200 2 - 33
MMF 50/125 400 2 - 66
MMF 50/125 500 2 - 82
MMF 50/125 2000 2 - 300