Accusys eXpeRAID - Manual (Page 16)

ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007 PAGE 16 OF 27
3.3.3 Basic Array Configuration Commands
3.3.3.1
Command Name Command Description
CreateArray Use this command to create an array with specified RAID level.
Parameter 1 Parameter Description
RAID Level:
<Level=<R0:R1:R5:R6:
R01>>
Parameter 2
Stripe Size:
<Stripe=<8:16:32:64:128:2
56>>
Parameter 3
Initialization Type:
<Type=<Fly:Evaluation>>
Parameter 4 RAID Level:
R0: RAID Level 0
R1: RAID Level 1
R5: RAID Level 5
R6: RAID Level 6
R01: RAID Level 0+1
Stripe Size:
Measures in KB.
1 KB=2 Blocks.
Initialization Type:
Fly: On-the-fly initialization
Evaluation: Performance evaluation
Member Drives:
Drive=<z1,x~y,z2>
where z1, z2, x and y stand for drive numbers and y must be larger
then x.
Example
Member Drives:
<Drive=<z1,x~y,z2>>
CLI>CreateArray Level=R5 Stripe=128 Type=Fly Drive=3,4,6~8
[Enter]
Array will be created with drive 3,4,6,7,8 with an unused array number
if all specified drives are available. If all array numbers have been used
CLI will reply error.