Accusys eXpeRAID - Manual (Page 26)

ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007 PAGE 26 OF 27
3.3.7 Firmware Update Commands
3.3.7.1
Command Name Command Description
UpdateSystemCode Update system code for the active controller. The controller needs to be
restarted for the new system code to take effect.
Parameter 1 Parameter Description
File Path:
<[DIR] <FileName>> File Path:
Specify an existing System Code image file(FileName) located in the
specified directory.
3.3.7.2
Command Name Command Description
UpdateBootCode Update boot code for the active controller. The controller needs to be
restarted for the new boot code to take effect.
Parameter 1 Parameter Description
File Path:
<[DIR] <FileName>> File Path:
Specify an existing Boot Code image file(FileName) located in the
specified directory.
3.3.7.3
Command Name Command Description
UpdateBIOSEFI Update BIOS and EFI firmware for the active controller. The controller
needs to be restarted for the new BIOS/EFI to take effect.
Parameter 1 Parameter Description
File Path:
<[DIR] <FileName>> File Path:
Specify an existing BIOS/EFI image file(FileName) located in the
specified directory.