Introduction, 1 overview, 2 supported operating systems – Accusys eXpeRAID User Manual
Page 6
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 6 OF 27
1. Introduction
This user guide provides eXpeRAID Command Line Interface (CLI) instructions for
configuring and maintaining your eXpeRAID. Before using this CLI, we assume that you
have already installed your controller in your system. If you have not yet installed
eXpeRAID, see Accusys eXpeRAID Installation User manual for instructions.
1.1 Overview
This Command Line Interface (CLI) is provided for you to configure and manage the
Accusys eXpeRAID components in Linux, Mac or Windows. The CLI is useful under
environments where a graphical user interface (GUI) is not available. Through CLI, you
can perform most of the storage management tasks that you perform with the eXpeRAID
storage manager GUI. CLI commands can be executed under either interactive or
non-interactive (script) mode, providing higher level API functionalities.
1.2 Supported Operating Systems
• Windows: XP, 20xx, Vista, …, etc.
• Linux: Fedora Code, SuSE, Debian, …, etc.
• Mac: Mac Pro, G5 …, etc.
CLI supports both 32-bit and 64-bit versions. Be sure you are using the correct version.