HATZ Diesel 4H50TIC User Manual
Page 42
Pos.
Designation
1
Error diagnosis display
2
Service interval indicator
3
Button for error interrogation
4
Protective cap
5
Starting key
6
Pre glow display
7
Air filter service required
8
Engine temperature display
9
Oil pressure display
10
Charge control
11
Operating display
Ignition lock
0
Off
I
Operation
II
Starting
Procedure
NOTICE
i
▪ After approx. 20 seconds the start procedure cuts off auto-
matically to protect the starter. If the engine is still not run-
ning after that, turn the starting key back to position "0" and
eliminate the cause (see the chapter 9.1 Fault table,
page 86).
▪ Turn the starting key to position "0" every time you want to
start the engine.
▪ The anti repeat device in the ignition lock makes it impossi-
ble for the starter to engage while the engine is running and
become damaged.
Step
Activity
1
Remove the protective cap (4) from the ignition lock.
4H50TIC
Operation and use
HATZ
Operator's Manual
43