HATZ Diesel 4H50TIC - Manual (Page 50)

8 Maintenance
8.1 General maintenance instructions
Safety notes
WARNING
Danger of injury from the failure to follow the operating in-
structions and from performing unauthorized tasks on the
machine.
▪ Follow all instructions.
▪ Do not perform activities for which no qualification is availa-
ble. Contact properly trained personnel if necessary.
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in the chapter 3 Safety,
page 7.
▪ Maintenance tasks may only be performed by trained personnel.
▪ Accident prevention measures must be in accordance with the local acci-
dent prevention regulations.
▪ Perform setting and maintenance work at the specified intervals.
▪ Replace faulty machine parts as soon as possible.
▪ Always use personal protective equipment.
▪ Only use fully functional tools.
▪ Problems may occur if unsuitable spare parts are installed. We cannot ac-
cept responsibility for damage and secondary damage that result from
this. We therefore recommend the use of Hatz original spare parts.
▪ Closely adhere to the maintenance conditions prescribed in this Operator's
Manual.
▪ Only make changes on the machine in agreement with the manufacturer.
▪ Only perform maintenance when the engine is switched off.
▪ Adhere to legal regulations when handling and disposing of used oil, fil-
ters, coolants, and cleaning agents.
▪ Protect the starting key against unauthorized access.
▪ Disconnect the negative battery terminal before carrying out maintenance
work.
▪ After completing maintenance work, check that all tools, bolts, aids and
other objects are removed from the machine and that all safety equipment
has been replaced.
4H50TIC Maintenance
HATZ Operator's Manual 51