HATZ Diesel 4H50TIC User Manual
Page 78
Advertising
1
Bleed screw (not open!)
2
Fuel feed line
3
Fuel fine filter
4
Hose clip
5
Strap wrench
Procedure
Step
Activity
1
Block the fuel feed line (2) using the hose clip (4).
2
Place a suitable container under the filter to collect emerging
fuel.
3
Unscrew the fuel fine filter (3) and according to local environ-
mental regulations.
4
Lightly oil the gasket of the new fuel fine filter, fit the filter and
tighten it by hand.
5
Release the fuel feed line.
6
Start the engine and perform a test run.
NOTE: When starting the engine, adhere to the procedure under
"7.4 Starting the engine for the first time/after a filter change,
page 42".
7
After the test run, check the fuel fine filter for leaks.
4H50TIC
Maintenance
HATZ
Operator's Manual
79
Advertising