Lincoln Electric IM753 RANGER 9 - Manual (Page 24)

C-1 ACCESSORIES C-1
GENERAL OPTIONS /
ACCESSORIES
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS -
For road, off-road and In-plant
and yard towing. ( For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc. ).
Order:
• K958-1- Two Inch Ball Hitch
• K958-2- Lunette Eye Hitch
• K959-2- Fender and Light Kit
• K965-1- Cable Storage Rack
K889-2 Hand Moving Undercarriage
• K1631-1 Puncture proof Wheel Kit.
K889-3 Hand Moving Undercarriage - with
Puncture Proof Tires.
K893-1 Caster Kit for use with K889-2 & K889-3
K933-1 Four wheel undercarriage - for hand moving
• K934-1 Gas Cylinder Bracket
K1770-1 Factory undercarriage
• K1745-1 Gas Cylinder Bracket
K1737-1 Four Wheel all-terrain undercarriage, for
moving by hand with heavy duty puncture resistant
pneumatic tires.
K886-1 Canvas Cover
K1788 Roll Cage
K802-N Power Plug Kit - Provides four 115V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 115/230V, 50 amps. (For K1418-2 or
K1419-2 CSA machines and machines with GFCI
receptacles, use K802-R
K802-R Power Plug Kit - Provides four 115V plugs rated at
15 amps each and one dual voltage, full KVA plug rated at
115/230V, 50 amps.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL
approved 120V ground fault circuit interrupter duplex
type receptacle with cover and installation instructions.
Replaces the factory installed 120V duplex receptacle.
Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limit-
ed to the 20 Amps. Two kits are required.
K704 400 AMP Accessory Kit Which Includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
K894-1 Spark Arrester Kit - Includes a heavy gauge
steel, approved spark arrester and clamp for easy
mounting to muffler exhaust pipe.
K857 25ft. (7.5m) or K857-1 100 ft.(30.4m).
REMOTE OUTPUT CONTROL CABLE
K896-1 GFCI - 115V Receptacle Kit
TIG WELDING OPTIONS /
ACCESSORIES
K930-2 TIG Module - Provides high frequency and
shielding gas control for AC and DC CTAW (TIG)
welding applications. Its compact case is designed for
easy carrying, complete with a handle. High frequency
bypass is built in.
The TIG Module is supplied without accessories, Arc
Start switches, Amptrols, cables, torches and mount-
ing brackets must be purchased separately.
Optional:
• K939-1 Docking Kit Mounting Bracket
• K936-1 Control Cable - (9 to 14 )
• K963-1 Hand Amptrol
• K963-2 Hand Amptrol
• K870 Foot Amptrol
• K937-45 45 ft. Control Cable Extension
• K844-1 water valve kit
• K449 LN-25 with contactor, Solenoid
RANGER 9