Lincoln Electric IM753 RANGER 9 - Manual (Page 9)

A-1 INSTALLATION
RANGER 9
A-1
* Based on a 10 min. period.
* * When welding, available AC auxiliary power will be reduced.
115V will operate either 60 Hz or 50/60 Hz power tools, lights, etc.
TECHNICAL SPECIFICATIONS - RANGER 9 (K1420-3,K1421-3)
Make/Model Description Horsepower Operating Displacement cu. in.(cu. cm) Starting Capacities
@ 3600 RPM SPEED Bore x Stroke in.(mm) System
Ranger 9 2 Cylinder 20.5 HP High Idle 39.9 cu in 12V Battery Fuel: 9 gal. (34L)
Onan P220 4 Cycle 3700RPM ( 653 cc in ) Cold Cranking Lubricating Oil :
{OHV} Air cooled Amps, Toggle 1.6 Qts. (1.5L)
Gasoline Start Switch,
Engine Full Load Charging Ammeter
Aluminum Alloy 3500RPM Manual Choke
Block with Cast
Ranger 9 Iron Liners & Fuel: 9 gal (34L)
Kohler Electronic 20 HP Low Idle 38.1 cu in Lubricating Oil :
Command Ignition 2200RPM ( 624 cc in) 2.0 Qts. (1.9L)
CH20S
INPUT - GASOLINE ENGINE
RATED DC OUTPUT - WELDER
MODEL HEIGHT WIDTH DEPTH WEIGHT
Ranger 9 Onan 30.3 in ( 770 mm ) 19.2 in ( 488 mm ) 42.3 in ( 1075 mm ) 598 lbs ( 272 kg
{P220 OHV}
Ranger 9 ( Kohler 591 lbs ( 269 kg )
Command CH20S )
MACHINE OUTPUT - GENERATOR
Welding Output Volts at Rated Amps * Duty Cycle Max. OCV @ 3700 RPM
AC Constant Current 25 Volts at 250 Amps
DC Constant Current 25 Volts at 250 Amps 100% 80 Volts
DC Constant Voltage 25 Volts at 250 Amps
Description Auxiliary Power for wire feeders AC Power * *
250 Amp AC/DC Multi-Process 42V, 60 Hz, 8 Amps 9,000 Watts 60 Hz. DC
Arc Welder with 40 Amps @ 115V
9,000 Watts AC Auxiliary Power 115V, 60 Hz, 8 Amps 40 Amps @ 230V
40 Amps @ Duplex Outlet
PHYSICAL DIMENSIONS