LT Security LTD2316ME - Manual (Page 105)

DVR User Manual
99
Solution: Please check the connection of hard-disk cable and data cable and make sure they are well connected; If still not
working, please unplug them and then try re-plugging again;
Second possible reason: It is forced to stop because hard disk has disabled track which causes the system checking hard disk
cannot skip
Solution: Change another new hard disk or reformat the broken one
Q10: How to input password and digital numbers
The method to input password and digital numbers is to click the box behind password or items needing to input by numbers,
and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use
the digital keys in the front panel, or the digital keys on the remote controller.
Q11: Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR? And
why must we format it again?
When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without
format. However, when a DVR adds to a new hard disk, it will identify the hard disk as a new one and inquire whether to format
no matter whether this hard disk used or not in another same type DVR before. In this condition, it can be used normally after
formatted according to the guide; if two or more hard disks used in different DVRs, when used in another DVR with the same
type, they will be identified to be two or more new hard disks, and all of them need to format. In general, please do not try using
more disks removed from different DVRs into another one in case the data lose.
Q12: What are the minimum configurations of PC for clients connecting?
PC Module Parameters
CPU Intel Celeron 2.4G
Motherboard Intel 845