LT Security LTD2316ME - Manual (Page 41)

DVR User Manual
35
4.6 Network configuration
Network configuration includes five submenus: network, sub stream, Email, server
and other settings.
4.6.1 Network
Step 1: enter into system configurationnetwork configurationnetwork; refer to
Fig4-29:
Step 2: HTTP port: the default value is 80. If the value changed, user needs to add the
port number when typing IP address in IE address blank .i.e. set HTTP port to 82, IP
address: http://192.168.0.25, user needs to input that address: http://192.168.0.25:82
into IE browser
Server port: communication port.
Step 3: If user selects the "Obtain an IP address automatically", the device will
distribute IP address, subnet mask, and gateway IP and DNS server.
Step 4: enable PPPoE to directly connect the DVR to internet via ADSL, and then
input the user name and password. Next, click TEST button to test the effectiveness Fig 4-29 network configuration-network
of the relevant information.
4.6.2 Sub stream
Step 1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-30:
Step 2: select fps, resolution, quality, encode and max bit rate
Step 3: user can setup all channels with same parameters. Tick off
“all” to do relevant setup.