LT Security LTD2316ME - Manual (Page 49)

DVR User Manual
43
Fig 4-36 add user-authority
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance
① Serial port
Step 1: enter into system configuration  P.T.Z configurationserial port; refer to Fig 4-37:
Step 2: tick off Enable and then setup the value of address, baud rate and protocol according to the settings of the speed dome.
Step 3: user can setup all channels with same parameters.
Fig 4-37 P.T.Z configuration-serial port