LT Security LTD2316ME - Manual (Page 28)

DVR User Manual
22
4.2.3 Spot
Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9:
Step2: select split mode: 1
×1and channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: select the split mode and then setup current
picture group. Click button to setup the previous
channel groups of dwell picture. Click button to set
the latter channel groups of dwell picture.
Step5: click
“apply” button to save the setting; click “exit”
button to exit current interface
Fig 4-9 live configuration-Spot
4.2.4 Mask
User can setup private mask area on the live image
picture, max threes areas.
Setup mask area: click Setting button, enter into live
image to press left mouse and drag mouse to set mask
area, referring to below picture. Click Apply button to save
the setting.
Delete mask area: select a certain mask area and click
left mouse to delete that mask area. Then click Apply
button to save the setting.
Fig 4-10 live configuration-mask