LT Security LTD2316ME - Manual (Page 37)

DVR User Manual
31
Fig 4-22 sensor-schedule
4.5.2 Motion
Motion includes two sub menus: motion and schedule.
① Motion
Step1:
enter into system configurationalarm
configurationmotion; refer to Fig 4-23:
Step2: enable motion alarm, set alarm hold time which means
time interval between two adjacent detective motions. If there is
other motion detected during the interval period which is
considered continuous movement; otherwise, it will be
considered that those two adjacent detective motions are two
different motion events. Click Trigger button, a dialog box will
pop-up:
Step3: the setup steps of motion trigger are familiar with alarm
handling; user can refer to Chapter 4.5.1 Sensor alarm
handling for more details.
Fig 4-23 alarm configuration-motion