LT Security LTD2316ME - Manual (Page 60)

DVR User Manual
54
Disconnect: the administrator authorized to disconnect the client terminal. When disconnected, that PC will not be able to
access the device within five minutes.
6.1.6 Record information
In this interface, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual
recording or schedule recording.
6.2 Manual alarm
In this interface, user can check the relevant parameters of manual alarm.
6.3 Disk management
1. Format the disk
Step1: enter into disk management interface
Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space,
and total space show OM at the bottom of screen.
Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to
save the setting
Step3: select a hard disk and click Format button to star format.
Note: all recorded files in the hard disk will be lost after formatted.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.