LumaSense Technologies INNOVA 1316A-1 - Manual (Page 82)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6020-14 1316A-1 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 82 of 98
Before starting a Hydrocarbon calibration verify that the Hydrocarbon
selected in the Hydrocarbon Mode (Hexane/Propane) is as for the
supplied gas from the gas cylinder.
Consult the Main Menu see figure 4.32 or in the Bench Command
menu (see figure 4.21 ) select Data/Status and select the
Hydrocarbon to be used for the calibration.
Figure 4.32: The Main window with HC mode selected to be Hexane.