Mediabridge MWN-WAPR300N User Guide - Manual (Page 32)

MWN-WAPR300N
27
4.10 Range Extender Setup
Disable: In this mode, a network cable is directly connected to the WAN port. Disabled is
the default mode.
Enable: This mode can be used if your ISP provides a wireless connection service or if
you want to use it to amplify your existing wireless network.
SSID: SSID (Service Set Identifier) is the identity of the wireless device to which you
wish to connect the Medialink router. Click the
“Open Scan” button to let the router
automatically search for an SSID.
MAC: To connect to the wireless device, the device
’s MAC Address must be in this field.
Click the
“Find Your Existing Network” button to let the router automatically search for the
wireless
device’s MAC.
Channel: The wireless device
’s communication channel. You must select the same
channel as the connecting wireless device to enable their communications. Click the
“Find Your Existing Network” button to see the channel of the connecting wireless