Mediabridge MWN-WAPR300N User Guide - Manual (Page 48)

MWN-WAPR300N
43
you
can build a FTP server on your computer and set the router’s port range forwarding
to enable your friends to access to these files on your computer. Suppose that your FTP
server or your computer’s static IP address is 192.168.8.10, and you want your friends to
access the server through the default FTP port: 21 and use TCP protocol.
Please follow the steps below to configure.
1.Enter 21 in both start port and end port fields, or you can also select FTP from the
well-known service port and port 21 will be added to the corresponding fields
automatically.
2. Enter 192.168.8.10 in the LAN IP column, and then select
“Both” as the protocol and
select “Enable” as shown below:
Then scroll all the way to the bottom of the page and click the “Apply” button to save the
settings.
Now, when your friends want to visit the FTP server, they only need to enter
ftp://xxx.xxx.xxx.xxx:21 in their browser address field. Here, xxx.xxx.xxx.xxx means your
router’s WAN IP address. For example, when your router’s WAN IP address is
24.65.128.52; your friends need to enter ftp://24.65.128.52:21 in the browser address
field.